Apple Tv Remote App Not Working
Try rebooting your remote if it’s still not operating as it should. While simultaneously holding down the Volume Down button, press the TV/Control Center button. When the status light on your Apple TV goes off and on again, keep holding the buttons down for around 5 seconds. Let go of the buttons.
If you cannot make your Apple TV Remote App or the Apple TV remote on your control center work, try these fixes. If you donat have a remote, and because the Apple TV Remote app isnat working, you can just disconnect the Apple TV from a power socket; wait for a few seconds, and plug it back in.
Plug the Apple TV back in, wait for the Home screen to pop up, and then check to make sure your remote is working. Since the remote itself will not work, you will have to reboot your Apple TV box. You can reboot your Apple TV box if the remote itself is still giving you problems. If your Apple TV box is working, but you cannot pair your remote, then the problem is likely the remote itself.
Once the Apple TV has, try using your remote to see if that has reestablished connectivity. The Apple TV remotes connection uses Bluetooth, and is generally quite robust, however, if it does indeed stop working, then the first troubleshooting step should be to reset your remote. Alternatively, you can reset your Apple Remote by holding down “Back”/”Menu” and “Volume Up” for five seconds, and then placing your remote over the top of the Apple TV to finish pairing.
To do so, double-press Home button (if your device has a Home button); If your device does not have a Home button, like the iPhone 11; swipe up and hold, and then locate the Apple TV remote app, and swipe up. On Apple TV 4K or Apple TV HD, go to Settings > Remotes & devices > Volume Control. On an Apple TV using its remote, go to Settings > General > Remotes, select your remote, and unpair it. For a 2nd-generation Siri remote (circular-directional controls), hold it 3-5 inches from your Apple TV box, and press the Volume Up and Back buttons for five seconds.
| Solutions | |
| Up to date Software | Ensure that the most recent versions of iOS and iPadOS are installed on your iPhone, iPad, and Apple TV, respectively, as well as tvOS on your Apple TV. |
| Restart | Restart your Apple TV or a smart TV that supports AirPlay 2 |
| Reboot | Try rebooting your iPad or iPhone |
| Contact Apple | Contact Apple Support if you’re still having trouble configuring the Apple TV Remote |
When volume controls on Apple TV Remote App work, you must clean your Apple TV Receiver, as well as your Siri Remote on the Apple TV, as they use an IR sensor for volume controls. To use the Siri Remote, you must choose a language and configure it to the Apple TV; if you do not, it will not work correctly. To pair the Apple TV Remote (2nd & 3rd generation) with your Apple TV Receiver, point the remote toward the Receiver and press both Menu and the right arrow buttons together.
Make sure that the remote has a clear line of sight to the Apple TV. This means that if there are any obstructions, like furniture or other people, that are standing in your way, you will want to move around obstructed objects so your Apple TV remote is able to see the device. It is just a matter of pressing the correct buttons on your remote – you will want to be able to see the lights on the front of your Apple TV.
If you’re interested in Pwnagetools, take a look at my other article
To reboot your Siri remote, first take a clear look at the device itself, so that you can see the light on the front. With the remote in hand, hold down both the TV icon button and the volume down button together for about five seconds, until you see the status light turn off on your Apple TV device, then back on. Press and hold the Power button, about a 2-second gap between each, and watch to see if the Apple TV begins to recognize the Power Button. Plug your Apple TVs power cord back into a wall socket, and see if the remote control responds quickly now.
Power-cycle your Apple TV if the Apple TV still does not respond to your remote after trying every possible solution for troubleshooting. If your Apple TV is not responding to remote inputs, then the following troubleshooting recommendations should make your remote working again. If the issue still occurs, you may need assistance from the Apple technical support department to resolve remote not working on your Apple TV. If the Apple TV 4K device does not power up when pressing the Menu or Home buttons of remote, make sure that you are remote does not have to be charged.
If you’re interested in Continue Reading Swipe Left, take a look at my other article
If you need to find the amount of battery left in your supposedly Siri-enabled remote, you can do that from the settings menu on the Apple TV. If you are unsure about your battery status, but you have your Apple TV connected to another device, like your iPhone or iPad, you can view that in your Control Center Apple TV Remote App. Check Battery Levels on Your Remote Once charged, the second-generation Siri remote should maintain full charge for months, even when used extensively, but if your battery starts getting low, the Apple TV should alert you when it is below 20%.
It may even lose charge if you do not use your remote for some time. The remote itself can get detached, and you need to re-pair it manually. When the screen indicates the remote has been successfully connected to your device, you can release the button. If you lose your remote, or if it is deader than dead, you can always fall back on Apples TV Remote in the Control Center on your iPhone, iPad, or iPod Touch. The Control Center on your iPhone, iPad, or iPod Touch. (This way, you will not need to buy a new remote).
Remotes are critical if you have an Apple TV at home; if a remote does not work with an Apple TV, you are going to feel awkward every time. Disconnect the WiFi router and the Apple TV from power, wait for one minute, then reconnect.
Why my Apple TV Remote app is not working?
Ensure that the most recent versions of iOS and iPadOS are installed on your iPhone, iPad, and Apple TV, respectively, as well as tvOS on your Apple TV. Restart your Apple TV or a smart TV that supports AirPlay 2. Additionally, try rebooting your iPad or iPhone. Contact Apple Support if you’re still having trouble configuring the Apple TV Remote.
Why won’t my Apple TV connect to my phone?
Verify that both devices are connected to the same network on the Apple TV and mobile device by going to Settings > Wifi and Settings > General > Network, respectively. Restart the Apple TV by going to Settings > General. Remove ALL the cables for 30 seconds, then restart the Apple TV. Restart your smartphone.
Why does my Apple TV Remote app keep disconnecting?
Users claim that the Siri Remote occasionally loses connection with the Apple TV 4K; however, this issue can only be fixed by pairing or restarting the remote, or by disconnecting and then plugging in the set-top box to restore the connection.