Skip to Content

Apple Watch Shows Apple Logo

Apple Watch Shows Apple Logo

Apple Watch Shows Apple Logo

Apple Watch Shows Apple Logo might be because of hardware issue. Try to fix the issue by quick restarting your Apple watch. Press and hold the side button until the slide shows to power off. Wait for some seconds and then turn on normally.

Before exploring viable remedies and ways of fixing the WatchOS issue, we should first look at possible causes of the issue. If you tried all of the different fixes that we suggested, but none of them worked, it is very possible that the issue is a hardware problem. If you think that the issue is hardware related, head over to your nearest Apple store and get some professional help.

Contact the nearest Apple Store or an Apple authorized service provider to set up repair. You may be able to get advice through an Apple support appointment with Apple or an authorized service partner. In that situation, your best action is to reach out to Apple Support to get additional help.

Fixes
RestartTry restarting your device to solve Apple Logo problem. Press and hold the side button on your Apple Watch until the power off slider appears on the display and restart the device
Audio PlayPlaying the audio through the Find My service should free up the Apple logo, and within a minute, your new Apple Watch would be off that screen and running as normal
Hard RebootDoing a hard reboot can fix the Apple Logo problem. Force the reboot on the Apple Watch by pressing and holding both the Digital Crown and Side buttons for at least 10 seconds
Different ways to fix Apple Logo problem on Apple Watch.

You might also want to book a appointment at a Genius Bar or pay a visit to an Apple authorized service provider for troubleshooting. If these are doing so, tell us what methods worked for you, or if they did not, tell us what Apple support told you was wrong, and how Apple support fixed it. If nothing has worked, then it is probably time to talk with Apple about repair.

It may be a software issue, which we can attempt to repair using the steps below. Fortunately, if stuttering is a software issue, we have the fix for your problems.

You can likely tell fairly quickly whether the hard reboot worked, as you will be breaking out of a loop, or stuck back into one. If a hard reset worked, move to Preventing your watch from getting stuck again next, as it might just be a temporary solution.

Hard resets (also known as forced reboots) are pretty powerful when it comes to fixing all kinds of WatchOS issues. A hard reset seems like a very unlikely thing to do if your Apple Watch is flashing and rebooting, but if it is showing the consistent Apple logo (and apparently not fully starting), it is probably worth trying. Force the reboot on the Apple Watch by pressing and holding both the Digital Crown and Side buttons for at least 10 seconds, until you see evidence of the hard reset appear on the display.

To do this, press the Digital Crown and the side button on your Apple Watch together for at least 15 seconds until you see the Apple logo disappear and appear again. Because your Apple Watch is stuck at the Apple logo, reboot it by pressing both the side button and digital crown together. Press and hold both the Side button and Digital Crown at the same time, and keep holding this position until you see the Apple Logo on the Apple Watchs screen.

Watch this video to learn how to fix the apple watch flashing blinking apple logo while charging

If your Apple Logo flashing problem continues, you may want to try forcing the smartwatch to reboot to see if it works. Now, with your iPhone unlocked, do a Force Restart of Apple Watch (repeating steps 1 through 4) and, once it is rebooted, see if Apple Watch is powered on with no issues. The first thing that you should try if you encounter any stray malfunctions and issues with Apple Watch, like your watch getting stuck at Apples logo, is to do a quick reboot.

If you’re interested in Iphone Wallpaper Zoomed In Too Much, take a look at my other article

A watch that displays the Apple logo, and then blinks over and over again, is probably restarting itself repeatedly, a problem sometimes called bootlooping. Youall know youave got the problem if the Apple logo repeatedly flashes at intervals of two seconds, never loading the home screen. Whether itas on your iPhone, iPad, or Apple Watch, one of the most frustrating problems youall run into is the blinking Apple logo, which prevents your mobile device from starting up as usual.

JailbreakingA aA directly changing your mobile devices OSA causes software compliance issues, which leads to an Apple logo. Hardware malfunctions a Any damage to your hardware may impact the software inside, causing your screen to display a flashing Apple logo.

Re-linking your smartwatch with an iPhone will usually fix a variety of issues on the Apple Watch, including the flashing Apple logo, watchOS 8 stuck at installation, and more. Even if you fixed the problem using the solutions mentioned above, this advice can help prevent the same problem from happening again. While Find My Apple Watch is designed to help reconnect Apple users to their devices, it may solve small software errors, such as having the Apple Watch stuck on the Apple logo.

Playing the audio through the Find My service should free up the Apple logo, and within a minute, my new Apple Watch SE would be off that screen and running as normal. Sometimes, this small trick using the Find My function will free the locked screen on your watch. After doing so, choose your smartwatch from your device list, then tap on Play Sounds.

Some of the inner settings may cause problems, the Apple Watch is turning on as normal, but do not know your watch has entered the “Curtain Mode” and Behavioural screen is not responding to touches, disable this mode. Your Apple Watch displays time and red lightening bolt (and cannot be used for any other functions) when it has entered into power reserve mode automatically, this happens when your battery is reaching low charging levels (power reserve mode can be enabled manually as well).

For that reason, it is recommended to quickly take out the magnetic charging cable, which comes with Apple Watch Essentials, or instead use a magnetic charging dock, and place your smartwatch into power reserve. Apple includes a diagnostic port hidden beneath one of the bands connectors on watch models, but to use it, you need a third-party accessory called iBus.

If you’re interested in Iphone 7 Kill Command 2021, take a look at my other article

If, after inordinate amounts of time, the Apple logo still does not disappear, though, you should consider using one of the following steps to try and figure things out. If there is a mismatch between your Apple Watchs calendar or time zone settings and the Watch app on your paired iPhone, that could also be the reason for a stuck Apple logo, since the Watch app is unable to communicate properly with your iPhone. We also organized the troubleshooting steps into sequence, starting from ways that are simple and do not result in data loss, all the way up to ways that are complete factory resets on Apple Watch.

Why is my Apple Watch showing the Apple logo?

Therefore, a fast restart should always be your first line of defence when dealing with sporadic bugs and troubles on your Apple watch, such as the watch being stuck on the Apple logo. Press and hold the side button on your Apple Watch until the power off slider appears on the display.

What do I do if my Apple Watch won’t force restart?

Make an effort to charge your watch for at least two hours. If your watch still won’t resume, try charging it while pushing and holding the side button until the Apple logo appears. Alternately, you may restart it forcibly by holding down both buttons for at least 10 seconds each time.

Why is my Apple Watch stuck on the charging screen?

The Power Reserve setting on your watch has been selected. When the battery is low on charge, this happens automatically. You can only tell the time right now (by pressing the side button once). The goal of this is to prolong the duration of this feature till you can recharge the watch once more.