Iphone Xr Earpiece Volume Low
Accessibility is under Settings. Click Audio/Visual. The audio volume balance slider should be moved all the way to the right. You could have a volume cap established. Make sure the Volume Limit slider is all the way to the right under Settings > Music. Siri may also be used to adjust the volume.
The fifth trick for fixing the low speaker volume on your iPhone when making calls is using speaker mode when making or receiving calls. Activating speaker mode will primarily boost sound while making or receiving calls. If your call audio routing settings are set to either Bluetooth headphones or Speaker mode, you will not hear any audio coming through your iPhone calls, even though you had volume set to its highest level the entire time. Make sure that Bluetooth is turned off in iPhone settings before making calls.
Call audio routing helps route your calls to another connected device, like speakers, Bluetooth, or AirPods, and this could be the likely cause of the audio not being heard through your iPhones speakers anymore. Sometimes, when using Bluetooth devices like speakers, audio is routed elsewhere other than your phone. After Bluetooth is turned on in an iPhone, the iPhone can be paired to other devices to share music or make calls.
Another minor, but possible, reason for the low-call volume issue with the iPhone could come from Bluetooth settings, particularly if calls were received via Bluetooth Mode. You may have warped some default settings on your phone related to audio while you were changing other settings on your phone, potentially leading to iPhones having low speakerphone problems. Adjustments are indeed justified in case the volume on iPhone calls gets lower after upgrading to a recent software release, since sound settings may have been adjusted and updated without you knowing.
If rebooting does not fix the low call volume in the iPhone, you may want to try to revert all settings in the iPhone. If the issue with iPhone call volume dropping is shared between all your sound sources, then it is time to reconfigure all settings and return them to their default states. You may want to downgrade the version of your iOS back to an earlier one that did not experience a volume issue.
You can change volume through Control Center, swiping down from top-right of screen (iPhone X and higher). You can head into the Settings of the iPhone > Music, and make sure that the Volume Limit slider is dragged right, in order to set a volume limit. Go to Settings > Music > Volume Limit, and you can set the highest volume you can. There is also the option to cap maximum volume, as well as a toggle for setting it according to European Union regulations (found in iPhones in the relevant regions).
| Solutions | Steps |
| Remove volume limit | Go to Settings > Music > Volume Limit, and you can set the highest volume you can |
| Make sure the Volume Limit slider is all the way to the right | Accessibility is under Settings. Click Audio/Visual. The audio volume balance slider should be moved all the way to the right. You could have a volume cap established |
| Ensure that Change with Buttons is enabled | Settings > Sounds and Haptics > Change with button is enabled |
If needed, you can remove your iPhones case and screen protector, and then control your iPhones volume. Remove your bulky iPhone case and try playing some music to see if the volume issue on the iPhone is solved.
Once you are done, phone somebody to find out if they changed your low earphone volume on the iPhone. Once completed, check to see if the Apples own native restart method increases volume while making or receiving calls on an iPhone. If you need to change volume settings on an iPhone, you can do it when on the phone, using the Volume buttons. The next time someone calls you, use the iPhones volume buttons to see if you can bring the volume back down to a level that is easy for you to hear.
If you’re interested in Does Do Not Disturb Block Calls, take a look at my other article
All you have to do is place your call, and then tap the Volume Up button on the side of the iPhone. If Volume buttons are not changing anything, head into Settings > Sounds and Haptics, and then make sure “Change With Button” is turned on. Adjust volume using the Side buttons; the screen will let you know whether this is obviously going through a different speaker. If not, you can adjust as needed, sliding to the right for higher volume, or left for lower.
Note if turning the speakers on does not fix your iPhones low calling volume, it might be damaged. Sometimes, if you have an bulky iPhone case, or the iPhone is flipped over, it can interfere with speaker volume. If there is a buildup of dust in the area around the speakers, then you are more than likely to have low-volume issues. Sometimes, an iPhones case can obstruct a devices speakers, and cause a lower volume.
If you’re interested in Facebookcommissioned Comscore Ios Android Theverge, take a look at my other article
If the tips above are not working, your iPhone might have a few problems on the inside. While it should not be cause for any sound complications, it is always worth keeping up with your iPhone updates to address potential issues.
If you do go through all of these troubleshooting steps, or your iPhone has suffered a physical injury such as water damage or dropping, then you might have to turn to the professionals.
Fixing a lower phone volume on an iPhone may be as easy as turning up the phones volume, or it could be complicated like having to have a few pieces of hardware replaced, but you cannot know how to solve a problem until you find out what is wrong. Here are a few troubleshooting steps that you can try to get the volume of your iPhone to where you want it, and to return to having unfrustrated conversations with the iPhones volume. If you believe that the volume problem is caused by the hardware, check out our Troubleshooting Guides for how to repair the iPhones speakers. Whether you are listening to audiobooks and music, or worried you are missing an alarm, having a low volume on the iPhone can be a real pain in the ass.
Usually, talking and listening to music on headphones is the most convenient method, but some users are experiencing lower call or music volumes when playing on headphones such as AirPods Pro/2/1, Beats headphones, or other wired or Bluetooth headphones. You will have to use Speaker Mode or Bluetooth headphones or headphones while on calls. Turning off your Bluetooth helps to restore the usual volume power.
If speakers, Bluetooth, and earbud modes are working well, but call volume is way down in the ears, clean your earpieces with a small, soft-bristled brush. If the sound from ear-mounted speakers sounds fine, but call volume from default speakers is just barely audible, blow canned air over speaker grilles, and then clean off the sludge by applying soft-bristled brush. The mobiles volume-playback/charging ports were not cleaned long enough, which caused the buildup of dust.
If your iPhones volume is still lower when you are making calls, even when you max the volume settings, keep reading. If your iPhone is still giving you low volume during calls, choose the option to Erase All Content and Settings instead, so that you can get a new, fresh iOS Firmware installed in the phone, before you contact an Apple Service Center. The best way to get louder call volume on your iPhone is by following the methods outlined below, until you are able to improve it again.
How do I increase the ear speaker volume on my iPhone XR?
You can use the buttons on the side of your device to change the audio level while using the phone or when listening to music, movies, or other media on your iPhone. The level of the ringer, alerts and other sound effects is controlled using the buttons. Siri may also be used to adjust the volume.
Why is my iPhone XR speaker volume so low?
The Volume buttons, which incrementally change the volume of music and video, are located directly behind the Silent switch. This is also effective if you want to raise the ringer volume. If the buttons make no difference, ensure that Change with Buttons is enabled under Settings > Sounds and Haptics.
Why is my earpiece volume so low?
You may discover that your volume is too low because of the operating systems on some phones. The most popular solution for Android devices is to disable Bluetooth Absolute Volume in your phone’s settings. This might be found in your phone’s developer options for some devices.