Skip to Content

Where Are The Fans On A Macbook Pro

Where Are The Fans On A Macbook Pro

The fastest way to know whether or not a computers fan has stopped working is by visual inspection. If it is a desktop, you can typically see the fan spinning at the rear of the enclosure. Depending on the laptop model, you should be able to tell where the cooling fan is located, and where it is venting the warm air. Pay special attention to your Macs fan itself and to its intakes, as well as to the whole back of the MacBook.

All of Macs models come with a few vents in the case, to allow air circulation, which keeps the MacBook Pro cool. Because vents are blocked, the warm air does not completely escape from Macs. Since fan vents are so small and narrow, it is easy to get them covered up, blocking airflow and not cooling your CPU properly. All that would need to be done using compressed air is spray compressed air into the fans vents until the dust stops coming out.

If compressed air does not work outside, you could also open up the body of the MacBook to wipe down your fans. Make sure that your MacBook Pros fans, intakes, and back are all clean. You might also have to open up the hardware and manually clean the fan/vents.

Cleaning your vents once every so often, if not regularly, may keep you safe from the blaring noise of fans. If you do not clean certain vents in the case often, accumulated dust will accumulate within MacBook Pros and will block fans, which will cause unusual noises. For that reason, you should avoid keeping MacBooks placed on blankets, pillows, beds, couches, or other soft surfaces, because that could easily restrict the airflow into fan vents, which would increase CPU temperatures, which would, in turn, send your MacOS into an overdrive.

Watch this video to learn about the Loud noise of the fans of MacBook Pro

You should keep the number of apps running on MacBook Pro low in order to prevent your fans from getting too hot. The more apps and browsers that are open, the faster the MacOS fan needs to turn in order to keep things cool. The more apps and browser tabs you have running, the higher the chance your Mac will need to engage its fans to keep things cool.

The Mac Book fans constantly working at high speeds can cause it to get too hot. Again, if their Mac is overheating, then the fan would have to work at full speed, causing a noisy sound. When the Macs processor is overloaded, the computer is going to heat up continuously, causing the fans to run even louder and create more noise. When the MacBooks fans begin taking over, this could be a sign of the CPU being overheated, airflow being bad, or processor resources being exhausted.

The Macs fan is what keeps the computer cool and makes sure that you are not getting too hot. The fans within are designed to cool down the Mac, but when the regular airflow does not flow around your laptop, they need to work overtime. While fans are meant to keep your Mac chilled, if the airflow around your laptop is bad, then they will struggle to do their jobs efficiently. If you were working with the Mac lying flat on your lap or desk, you were actually blocking out all the air that was flowing under the laptop, forcing fans inside to work twice as hard to keep components cooled.

Unless you have a mini, fanless MacBook, then Your MacBook Pro or MacBook Air will sometimes turn up the cooling fan in order to maintain thermal control. If you live in a hot part of the world, or just the room where you are using your MacBook is a little too hot, that could of course make your MacBook heat up faster, forcing it to spin up the cooling fan at higher speeds. There are various apps out there that allow you to bypass your MacBooks default fan settings and manually manage the speed and behaviour of the fans, so you can get them to run slower so they produce less noise. If you would like to do that, and have the trust of your own personal judgment that you are not going to overheat the MacBook or put too much strain on the cooling fans, you could install one of these apps and use it to manually control the fan on the MacBook.

If your Mac starts getting too warm, it is simple to manually increase the fan speed to help with cooling, or to have TG Pro automatically do this using rules. You can set maximum temperatures higher if you need to get better performance, or lower if you would prefer the Macs fans to be quieter. Normally, throttles kick in before temperatures rise too high, but you can push the CPU further by turning fan speeds higher than Apple normally allows.

If ambient temperatures are higher, fans kick on earlier and work faster. Apps such as Photoshop, Final Cut Pro, and VMware Fusion/Paralles Photoshop will generally make your fans speed up, since the CPU/GPU temperatures increase while using apps such as Photoshop.

The laptops internal fans draw in cooler air via the intake vents, and depending on your laptop, the cooler air path may be useful for cooling components directly, since cooler air is drawn to the fans. Each specific configuration has its own advantages and drawbacks, so it is up to the user to decide which best suits his needs. All of the latest MacBook laptop models that feature an integrated air-cooling system incorporate a CPU heat sink, heat pipes, heat sink, fans, intake vents for cool air, and vents for venting hot air.

How do I clean the fan on my MacBook Pro?

Put a finger in the center of the fan to stop it from turning. Take your brush and use the bristles to slowly try to loosen the dust particles. You’ll eventually see that the fan has a significant amount of dust hidden inside it. Once the dust has exited the fan, gently blow it away.