Best Nas For Video Editing
The top 5 NAS for video editing in 2022 are shown below. Best for Personal Use: Synology Disk Station DS718+, Best for Bays: QNAP TS-H973AX-32G 9-Bay, and Best Overall: Synology DS1618+. The Synology 5bay Expansion Unit DX517 is the most cost-effective. The Synology Rack Station RS2418+ is the best rack mount.
Although it is not quite as simple as using traditional SSDs built-in, or external storage over USB and Thunderbolt, editing video with an NAS can provide significant advantages and improvements for even a lower-level post-production environment focused on privately-or-commercially editing videos. While there are a few solutions for video editing, Network Attached Storage (NAS) uses less energy, generates less heat and vibration, offers higher read/write speeds, and is very effective. If you are working at a smaller business, where there are more computers, users, and projects that need storage, network-attached storage (NAS) might be the best option for you.
Investing in a good NAS may be a smart investment if you are looking to enjoy the convenience of data storage and management. Take your company to the next level by using a good NAS to improve data and file management. If you are looking to gain a competitive advantage over other video editors, having a good NAS may be a great starting point.
If you are serious about using a NAS-based editing environment, if you can get past some of the technical requirements, then the benefits are enormous. That is, editing from a NAS disk is not plug-and-play, and it requires a skilled hand to get set up. If you think that a NAS drive will allow you to transfer every kind of media that you own to any device or TV, remember that some devices will only play specific types of files, and you will have to have the software and hardware working together for this to happen. When buying a 512GB SSD, you need to remember you cannot keep video files on the drive.
| NAS Type | Best For |
| Synology Disk Station DS718+, | Personal Use |
| QNAP TS-H973AX-32G 9-Bay | Best for Bays |
| Synology DS1618+ | Best Overall |
| Synology 5bay Expansion Unit DX517 | Most cost-effective |
| Synology Rack Station RS2418+ | Best rack mount |
When you have big files that need editing and exporting, particularly in 4K, then you need a faster SSD. As professions increasingly shift from 4K to 8K, you are going to want faster transfers speeds, as well as more storage. If you are looking to directly edit videos stored on the disk, you want a solution that has a higher bitrate than the rate at which you are shooting. The speeds and storage needs for someone working with video are far greater than in most other creative disciplines, simply because video is such a data-intensive medium.
Ask any video editor, they will tell you fast storage is crucial, and cannot be compromised when editing video at a high resolution. While HDDs are cheaper than SSDs, you still want to have one fast enough to process videos, otherwise, you are stuck at the computer all day. If you are serving HD videos across the home network to two tablets, one laptop, and your smart TV, all simultaneously, you will need an NAS with higher specifications for memory, CPU, and networking capabilities. The amount of storage space you need in the NAS that you are planning on using for video editing might sound straightforward at first.
For example, if you invest in an 8-bay NAS loaded with 8TB drives, you would be able to hold 64TB of data. We do not typically recommend NAS drives that have only one bay, unless it is strictly to backup data that would also live on computers in your network. For most home users that are not avid video file hoarders, a dual-bay NAS should suffice, provided that you purchase large enough drives at the start if you are going to be mirroring, meaning just making one drive a precise replica of another. Depending on the needs of your facilitys storage, you will have to procure the hard drives you are going to be adding to your NAS array.
Find out in detail about Galaxy Wallpaper Iphone in my article.
You may also find hard drives with battery storage, so you can move videos right into the hard drives when you are still on location, or while in the car driving home. Using an NAS with multiple drive bays and internal drives will let you maximise that connectivity and completely fill up the 10GbE for editing videos. For video editing processes that include multiple users, a single NAS drive could easily deliver 1,000MB/s per throughput on both the 10Gbe and Thunderbolt 3 lines. For needs, the QNAP TVS-1282T3 is loaded with top-of-the-line technologies including automatic data tiering, block-based snapshots, and SSD caching.
NAS Storage for Video Editing allows for managing users roles and access rights, as well as doing much of the heavy lifting. The Synology DS3617XS has scalable storage, which you can expand to 12 HDDs. It is a solid storage solution that has a star-level performance and it is capable to meet even large-scale businesses needs. Moreover, the QNAP TVS-1282T3 has 8 RAID-enabled HDD slots, which shows how QNAP has recognized the fact that people want a dependable, high-poweredNAS which is capable to surpass the expectations of any one.
Combining QNAPs TVS-1282T3 with devices like this one would lead to faster file sharing, a superior 4K workflow, and flexible file storage. It has 2 Thunderbolt 3 ports and 2 10GbE ports, which results in incredible data transmission speeds, which is recommended for video data. It comes with all the necessary hardware that is required in a video editing server, that is, 4 Bay Storage, 10GbE connection, Thunderbolt 3, NVMe Storage Bay, and USB 3.0. Starting from the CPU, the NAS unit comes with a Intel i7 Quad-Core CPU, RAM which can be upgraded up to 64GB, 4 Thunderbolt 3 ports, Dual 10Gbe ports, and 8 drive bays.
The QNAP TVS-1282T3 provides 4 Thunderbolt 3 ports that allow for seamless collaborative modes between Windows and Mac devices. As video editing requires massive storage to accommodate each and every file at a higher resolution required, Synology offers QNAP TVS-1282T3. To increase NAS performance for optimal video editing, we recommend using a NAS configuration with more than one HDD or SSD in order to benefit from both redundancy and multi-drive access performance advantages that come with RAID (Redundant arrays of independent drives). Thunderbolt NAS is still one of the best options available to video editors working in a team, and who must share a single storage array for backup, real-time editing, deployment, and managing multiple archives within a home.
Read about How To Find Saved Passwords On Iphone in my article.
Many users have been editing videos in onsite Thunderbolt storage for years, most often called a DAS (Direct Attached Storage), Thunderbolt NAS allows multiple users to connect over thunderbolt and edit videos in a single storage enclosure. While it is certainly not a new way to edit video on a NAS, connecting via Thunderbolt to the NAS is still a relatively new technique, and a technique primarily only available with QNAP. While not anywhere near as important as choosing the right CPU for your 10GbE NAS solution, you will still want to take into account the storage memory while configuring your device for video editing. It is even possible to configure a NAS with Internet connectivity, which would serve as its own private cloud.
Is 8GB RAM enough for NAS?
4GB or 8GB will be adequate for basic usage. We would advise at least 16GB if you have a corporate Synology NAS. The RAM will be heavily taxed if more individuals open and save their work simultaneously on the NAS.
Can you stream 4K from a NAS?
The main determining factor is whether or not your gadget supports 4K streaming. The majority of current multimedia players can smoothly play 4K films. Videos saved on Synology NAS may be accessed by devices like smart TVs and multimedia players utilising My Network Places (SMB) or Media Server (DLNA).
Does CPU speed matter for NAS?
While CPU speed does important in a storage array, it doesn’t matter nearly as much for a residential NAS as it does for an enterprise array. In terms of IOPS, the CPU is important. Every IO should take 1-2 CPU cycles to handle the interrupt instruction and setup the data transfer.