Liquid Has Been Detected In The Lightning Connector
If the lightning connector of your iPhone is wet, you should tap your iPhone gently against your hand to remove the excess liquid from your iPhone. Then, leave your iPhone in a dry place so that the liquid may be dried out. After half an hour, you should try a lightning cable to charge your iPhone.
Anyway, in the event that water is present inside the iPhones Lightning connector (i.e., charging port), our iPhones display an alert that says, Liquid detected inside the Lightning Connector. The most direct way to remove the Liquid Detected in Lightning connector error message and have your iPhone charging normally again is to dry the charging port/lightning connector on the iPhone itself. While you can still use the phone when this notification appears, the phone will not charge until either the lightning connector on the iPhone, or the lightning cable itself, is completely dry.
If your charging port is dry, but the iPhone still gives a liquid detection error, check the Lightning cable. You can still use your phone, just that you cannot charge it with your lightning cable until the port is completely dry. Do not plug in a charging cable, Lightning headphones, or any other accessories until your iPhone is completely dry.
That is, if you really want to bypass the warning, you first need to fully dry off the exterior of the phone, and think about charging wirelessly instead.
Most of the time, choosing the Emergency override option will let you charge the iPhone just fine, regardless of the alert. While we recommend against dismissing this option, you should select the Emergency Override if you are in a rush and you need to charge the phone, you will run the risk of damaging the device, and charging the iPhone despite being soaked. If you have to charge your phone right away, and do not have any wireless charging, then you have to select Emergency Override.
If an emergency occurs and you need to immediately charge the phone, you will have this feature and it will charge the iPhone. If there is an emergency, you can choose to bypass an Aliquid detected message and charge your iPhone. When you have implemented the methods highlighted above, a lingering liquid detected warning in your Lightning connector should no longer show up on your screen, and your iPhone should now be charging normally.
If you are getting an alert even after following the steps mentioned above, it means water or fluid is still present in your charging port. Your iPhone is sensing liquid, but your Lightning connector and cables are dry because of the debris and dust trapped inside the charging port of your iPhone.
A similar warning does not necessarily mean there is liquid in your charging port or that your cables are wet, this can also occur because of humidity in the area. Such an alert can also mean that the water/liquid has sloshed over various components on your iPhone. Such notifications are sent to users when the liquid is detected on your iPhones light sockets or on its Lightning cables.
| What To Do | |
| Tap your iPhone | Tap your iPhone gently against your hand to remove the excess liquid from your iPhone |
| Dry Your iPhone | Then, leave your iPhone in a dry place so that the liquid may be dried out |
| Charge Again | After half an hour, you should try a lightning cable to charge your iPhone |
That is why Apple automatically turns off your lighting port when the phone detects liquid inside. After shining light in a port, if you cannot see any debris, then it is highly likely the port, or an accessory you are trying to use, is damaged. Do not use a hairdryer to dry out the lightning port on an iPhone; wind may force fluids into your phone, causing internal parts to become damaged.
Make sure you remove cables and accessories, as using these when your iPhone is damp may erode the lightning port pins, causing permanent damage to your iPhone and connectivity issues.
The best, most secure way to remove water from the lightning port on an Apple device is to dry-wipe it off and let the iPhone dry. According to Apples support service, placing an iPhone in a bowl of rice, drying it using a blower or compressed air, and placing an object inside of the charging port may cause the water drops to move farther. Water found in the ports of iPhones is likely the collateral effect of extensive water damage, which is usually hidden, and may slowly harm the phone over time, either by penetrating into the device or by corrosion.
Rainwater — If you are outside during wet weather and you have an iPhone in your pocket, there is certainly the possibility that some drops of water may get in your Lightning connector, thereby disabling the connector for charging the phone. Spilled drinks or water – If your phone is anywhere near any liquids or spilled drinks, then even its proprietary lightning connector could be wet, particularly if it is facing a liquid container.
The liquid detection in Lightning connectors will appear if any kind of humidity is present, both on your Lightning accessories and within the charging ports. If you still see a Liquid Detected warning, place the iPhone somewhere dry and air-flowy for up to one day, and then try charging or connecting a Lightning accessory again.
You should continue trying to charge the iPhone at 30-minute intervals until the alert stops showing. Leave it at least 30 minutes, at which point you can test whether or not it is charging. Repeat the above steps, but allow the iPhone to dry out for a little longer, then check your iPhone with the charger or accessories again.
If you’re interested in Turn Off Phone Without Power Button, take a look at my other article
If you have fully dried out your Lightning charging ports and cables, but you are still getting an error message when plugging in your phone, try rebooting your device. You should immediately disconnect the Lightning port, and avoid plugging anything like the headphone jack or anything else. Droplets will land under your charging cable pins, so you will get the charge-not-available warning on your iPhone.
If you’re interested in What Do The Blue Lines Mean On The Weather App, take a look at my other article
If the alert keeps appearing, and there is no dust or debris inside your iPhones Lightning connector, and you did not put the iPhone in contact with water or liquid, you can select the Emergency Override option with confidence. There may be foreign material in the port, a software error in the iPhone, or a damage to the liquid contact indicator (LCI).
Why does my iPhone keep saying water detected when there is no water?
When you are certain that your device is dry and you receive a liquid-detection notice, this is usually the result of a software error. Simply force a restart to fix the bug (liquid detected in the lightning connector but no water). Step 1: To begin, swiftly press and release the volume up button. After then, press and then let go of the volume down button.
Why does my iPhone keep saying liquid detected?
The iPhone includes a built-in function that alerts users when there is liquid in the lighting port or on your charging cable (iPhone XS, iPhone XS Max, iPhone XR, or later). Moisture may be to blame for this rather than a liquid being present in the charging port or a wet wire.
Can you fix a liquid damaged iPhone?
Unfortunately, repairing liquid damage inside the display itself is difficult. If there is significant damage to the display, use the phone’s repair manual to replace it. Clean up any corrosion or residue that may be on the case assembly using the wet cloth.