Iphone Dead
If your iPhone is completely unresponsive and won’t turn on or respond to any buttons or touch gestures, connect the iPhone to a power source using the original charger and cable, and let it charge for at least 30 minutes. If the battery was completely drained, it may take longer to turn on.
When you have a dead iPhone, it can be very frustrating. It may be caused by a hardware problem with the power button or button cable. All of your precious data is lost unless you have backed it up elsewhere. The best solution is to try and restore the software on the phone by charging it and following some steps. You can find tutorials online for how to do this, but if that doesn’t work then you may need to take your phone to an Apple store for assistance. If all else fails, then you’ll need to purchase a new device and start anew with your data.
If you’re interested in Apple Payment Method Declined, take a look at my other article
An empty battery icon on the iPhone screen can be a sign that your device is dead. This happens when the battery symbol shows up, but no power source is connected to it. If you have access to a power adapter or wall plug, try plugging your cable into it and charging for at least 15 minutes before attempting to turn on the device. If you’re using a car charger, make sure the jack is firmly plugged in and that the battery icon appears on your phone’s screen. If none of these solutions work, then your iPhone has likely died and will require either an expert repairman or new purchase.
When an iPhone has died, the first thing to check is the charger plugs. Make sure the power adapter and wall charger are properly connected to a wall outlet and that you are using a different USB cable. If all of these components seem to be working, then try plugging it into another power source like a laptop or desktop computer. If your phone still isn’t charging and there is no meter display on your phone’s screen, then it is likely dead or in need of repair. Try plugging in some other headphones with an audio jack into your iPhone as this may revive its battery life temporarily.
It is possible that your iPhone is dead due to a lack of charge. Check the right side of the phone to make sure it has a proper charger connected. If not, you’ll need to plug the lightning cable into the wall socket and then into your iPhone’s left side. Hold down both volume buttons for several seconds until you see an Apple logo appear on screen. Wait for a few minutes before pressing any other buttons, as this will allow your device to connect with its adapter and begin charging. Once it’s plugged in, wait until your battery bar shows that it is fully charged before unplugging it from the wall socket again.
| Solutions | |
| Charge | Check cable and power adapter and charge iPhone |
| Hard reboot | Hard reboot the dead iPhone |
| iTunes | Restore the dead iPhone with iTunes |
| DFU mode | Restore the dead iPhone in DFU mode |
| Revive | Revive the dead iPhone battery |
If your iPhone is completely dead and won’t turn on, you can try to force restart it. To do this, press and hold the lock button located at the top of your phone for about 10 seconds until you see an Apple logo. Then release the button and press it again for a few seconds to boot up your device. Another option is to press and hold both the home button on the bottom of your phone and side button (also known as volume down) at the same time for about 10 seconds until you see an Apple logo. If this doesn’t work, then connect a USB cable from your device to a computer with iTunes running so that you can perform a hard reset using iTunes’s options menu.
To restart your iPhone, hold down the Home Button and the Wake/Sleep button at the same time for about 10 seconds until you see an Apple logo. If earlier holds didn’t work, then press and hold both the Home Button and Wake/Sleep buttons at the top of your device simultaneously for a few seconds until you see a slider appear on your screen. Slide this slider to power off your device after which it will turn off.
A depleted iPhone battery is dead and will no longer respond to taps or swipes. This is indicated by the dead battery symbol on the phones display. Pressing and holding down both the power button and one of the wake buttons for several seconds will force a restart, but this won’t fix a dead battery. To revive your phone, plug it into an Apple-certified wall charger and wait until it reaches a certain threshold of charge before turning it back on. Apples built in battery charging management system can take up to several minutes, or even hours depending on how low its charge was when plugged in before displaying its famous logo upon wake up from sleep mode.
When an Iphone hits this level of charge, it will refuse to turn on and display a blank black screen with no sign of life. This can be a cause of concern for many users, who fear that the memory inside their phone has been wiped out or worse, that the phone is dead. The good news is that this isn’t necessarily the case. In some cases, when an Iphone displays a black screen after being plugged in, it’s simply because its battery has gone completely flat and all it needs to kick start it again is some power from an external source such as a wall charger. Therefore if your Iphone appears to be dead but you’ve already tried holding down the power button for several seconds without anything happening then you should try charging it first before jumping to any conclusions.
If your Iphone is stuck on the Apple logo after restarting, then it is most likely a hardware issue and you should take it to the nearest Apple store. A Genius at the store will be able to help you with any frozen display, hardware or software issues. You may be able to book an appointment online beforehand but in some cases they could assist you right away. If your device has experienced water damage or if there are other physical damages present then you may need to replace certain parts for it to work again. Otherwise, a simple restart can sometimes resolve the problem of an Iphone stuck on the apple logo and bring it back from being dead.
If you’re interested in Untethered Jailbreak Ios 7.1, take a look at my other article
If this does not work, there are a few other things to try. A software glitch or problem can be the cause of an Iphone being dead and in this case, a better fix is to use a third-party tool called iMyFone Fixppo. This tool helps users troubleshoot various software issues on their Iphone that could lead to it being dead. If the Iphone is still dead after using iMyFone Fixppo, then the issue might be hardware related and users may need to do a hard reset or seek technical assistance.
It could be an issue with the battery, either faulty or dead. If that’s not the case then the problem may be a software crash, it may be necessary to press the correct buttons in order to reset it. If this does not work then a good option is to update your Iphone as this can sometimes fix any problems with the software or even unfreeze a frozen screen. It is important to remember that if there is an issue with your battery and it needs replacing, then using technical assistance would be a good idea as you do not want to risk doing any damage yourself.
Is it possible to revive a dead iPhone?
The good news is that a fresh battery will instantly revive your phone. You can get an iPhone dead battery changed for free (for batteries depleted below 80% of their capacity) if your iPhone is protected by Apple Care. If not, you may just purchase a new battery.
Can a dead iPhone be located?
You may view the last known position of a lost iPhone, but not the current location. You can still view the most recent location as long as Locate My iPhone Last Location is turned on you would have had to manually turn this function off otherwise.